Advertisement
D7030X-S8 | Installation Guide | 9.0
8.0
Using a D7032 with the D7030X-S8
Each D7030X-S8 processes 16 zones of information. When a D7032 Eight-Zone LED Annunciator Expander is
connected to the D7030X-S8, an additional 8 LED zones appear allowing the D7030X-S8 and D7032 combination to
show a total of 16 LED zones. If no D7032 is attached, only the lower 8 zones appear. Up to 8 D7030X-S8 and
D7032 combinations can connect to the D7024 FACP.
Table 2 identifies the D7030X-S8 and D7032 combinations.
Table 2:
D7030x-S8 and D7032 Combinations
D7030X-S8
Zones
Covered
1
1 to 16
2
17 to 32
3
33 to 48
4
49 to 64
5
1 to 16
6
17 to 32
7
33 to 48
8
49 to 64
Note: The column labeled "Appears on D7030X-S8" applies whether or not the D7032 is connected to any D7030X-S8.
9.0
Specifications
Table 3:
Specifications
Operating Voltage
Standby Current
Alarm Current
Dimensions (H x W x D)
Wire Type
Maximum Distance Allowed Between
the Control Panel and Annunciators
Maximum Distance of Annunciator
Wire for each System
Listings and Approvals
Number for each System
6
Specifications
Appears on
Appears on
D7032
D7030X-S8
(if attached)
1 to 8
9 to 16
17 to 24
25 to 32
33 to 40
41 to 48
49 to 56
57 to 64
1 to 8
9 to 16
17 to 24
25 to 32
33 to 40
41 to 48
49 to 56
57 to 64
12 VDC nominal
35 mA (27 mA for battery calculation)
175 mA (132 mA for battery calculation)
4.5 in. x 6.5 in. x 0.75 in. (11.4 cm x 16.5 cm x 1.9 cm)
Non-shielded, four-wire
1000 ft (305 m)
4000 ft (1219 m)
UL 864
Eight D7030X-S8, eight D7032 maximum
Comment
Combination with lowest option bus address such as
Address 1.
Combination with second lowest option bus address such
as Address 2.
Combination with third lowest option bus address such as
Address 3.
Combination with fourth lowest option bus address such as
Address 4.
Fifth combination repeats first combination.
Sixth combination repeats second combination.
Seventh combination repeats third combination.
Eighth combination repeats fourth combination.
Bosch | 11/04 | 48176D
Advertisement
