To charge the battery, connect the AC adapter as shown
below. Connect the other end to the power cord, and
plug it in to an electrical outlet.
Caution:
Do not connect the AC adapter when the battery is not
installed; this can damage the P-4000.
Do not remove the AC adapter while you are using the
P-4000.
The battery status is displayed in the top right corner of
the screen when the P-4000 is on.
Battery is fully charged.
:
Battery power is about half full.
:
Battery power is low.
:
Battery power is running out. Charge the battery using the
:
AC adapter.
Battery is charging.
:
11