Fine-Tuning the Projector
118
3. When you see a message asking whether you accept the present
image as the user's logo, select
box displays over the image.
4. Use the
pointer button to select the area of the image you
want to use. Then press
5. When you see the message
and press
.
Enter
6. Use the arrow buttons to select a zoom rate (display size) and press
.
Enter
7. When the message
and press
Yes
Enter
Do not use your projector, remote control, or video source while
the logo is being saved.
8. When you see the message
menu screen.
Choosing When to Display the Image
After your image is saved, it is automatically set as the startup screen.
You can also set it to display as the screen you see when there's no
signal or when you press the
1. Press the
button, highlight the
Menu
.
Enter
2. Select
and press
Display
3. Highlight
Background Color
4. Select
and press
Logo
5. When you're finished, press
and press
Yes
.
Enter
Select this Image?
Save image as user's logo?
. Saving the logo may take a few moments.
, press
Completed
button (see page 32).
A/V Mute
Extended
.
Enter
and press
Enter
Enter.
to exit.
Esc
. A selection
Enter
, highlight
Yes
appears, select
to return to the
Esc
menu, and press
.