Epson BrightLink 475Wi Start Here Manual page 4

3 Calibrate
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don't match, you can calibrate manually. You
don't need a computer, and you won't need to calibrate
again unless the projector or image is moved, or the
image is resized.
1
To start calibration, press the Menu button on the
remote control, select the Extended menu, and
press Enter.
2
 S elect the Easy Interactive Function setting and
press Enter. You see this screen:
3
Select Manual Calibration and press Enter. You
see this screen:
4
 P ress Enter to select Yes.
Follow the instructions on the screen to perform manual
calibration.
For more detailed instructions, see the on-screen
BrightLink User's Guide.
Using the Remote
Control
Turn projector
on/off
Access menu
system for
additional
adjustments
Page through
documents
Temporarily
turn off image
For more information on using the remote control and
cool time-saving buttons:
•
See the BrightLink User's Guide on your computer or
on the CD in this Welcome Kit.
•
Go to the training section and watch a video or two at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada) or atomiclearning.com.
Select from various
image sources
connected to the
projector
Enter
Zoom in and out
Stop video action