Epson Stylus Photo 1200 User Manual page 80

Be sure to support
your Panoramic
Photo Paper or
Banner Photo Paper
as it ejects from the
printer so it doesn't
fall onto the floor.

    
 
!        
You can use Panoramic Photo Paper to print large format panoramic
photos. Before loading the paper, make sure it's flat; if it curls, place it
between two sheets of paper and put a heavy object on top to flatten it.
Before loading the paper, pull the printer's paper support extension all the
way up. Then load the paper one sheet at a time, printable side up. While
holding the paper up by its top edge, press and release the E load/eject
button to feed the paper into the printer. Select Photo Paper as the Media
Type and Panoramic 210
software.
!  .     
You can use Banner Photo Paper on a roll to print photographic banners,
panoramas, and signs up to 44 inches long. Before loading the paper, cut
it to the desired length of your image plus 2 inches to account for the
necessary margins. Make sure the cut sheet is flat; if it curls, flatten it
following the instructions included in the paper package. Then remove the
printer's paper support and load the paper one sheet at a time, printable
side up. Support the paper from underneath or by its edges, then press
and release the E load/eject button to feed the paper into the printer.
Select Photo Paper as the Media Type and Banner as the Paper Source
in your printer software. Don't select PhotoEnhance3 when printing on
Banner Photo Paper.
An accessory Roll Paper Holder (0 10343 81750 0) is available for
loading Banner Photo Paper. Contact your EPSON dealer or call EPSON
Accessories at the number listed in
594 mm as the Paper Size in your printer
Where To Get Help to order it.