Epson WorkForce WF-7510 Quick Setup Instructions

Start Here
Read these instructions before using your product.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Note: These illustrations show the WF-7520, but the instructions are the
same for the WF-7510 unless otherwise noted.
Remove all protective materials.
Caution: Do not remove the plastic strip as
shown. It is part of the Automatic Document
Feeder.
2
Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
Caution: Do not connect to your computer yet.
*412201800*
*412201800*
2
French control
panel stickers
3
1
2
3
4
5
6
7
8
Note:
control panel. For more information, see the online User's Guide.
4
1
Squeeze the release bar underneath to raise the control
On button.
panel. Then press the
Note:
If you want to lower the control panel, squeeze the
.
release bar underneath
Caution: To avoid damaging the printer, make sure you
squeeze the release bar to lower the control panel. Don't try to
push it down without releasing it.
Select settings
To select English as your language, press OK.
If you want to change the language, press
select it, then press OK.
Select your country/region and press OK.
Select your Daylight Saving Time setting (Winter/
Summer), and press OK.
Select the date format and press OK.
Press the number keys to enter the date and press OK.
Select the time format (12h or 24h) and press OK.
Press the number keys to enter the time. Then press
or to select AM or PM, if necessary.
Press OK.
You can change the date and time settings using the printer's
Install ink cartridges
Lift up the scanner unit.
or to