Protecting The Boot Manager With A Password - Nokia EM5400 Installation Manual

7
Using the Nokia IPSO Boot Manager
2. Enter the information the install command requests (your system IP
3. When asked if you want to install a diskless image, enter
4. Enter the information related to installing on a diskless system (device for
5. Reboot the EM5400 appliance.

Protecting the Boot Manager with a Password

To prevent accidental or unauthorized access to the information stored on
your Nokia EM5400 IP Security Platform appliance, you can require that the
user enter a password to access the boot manager install command. Use the
password command to set the password.
Note
The password you enter gives you access to the install command in boot
manager, not access to IPSO.
To set a password
1. At the boot manager command prompt enter:
2. If the appliance is protected by a password, enter your current password.
3. Enter the new password.
4. Enter the new password again.
70 Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
address, the server IP address, and other information).
image, device for remote logging).
BOOTMGR[0]> passwd
The passwd utility prompts you for your current password.
The program prompts you for the new password.
The program prompts you to re-enter the new password for verification.
.
y