Installation - Philips ADD5910M User Manual

Main technical speci�cations
Product model
Filter model
Rated voltage
Rated frequency
Rated power consumption
Applicable water source
Anti-shock level
Type of protection
Applicable inlet water temperature

3. Installation

Before using the appliance for the first time
• Remove all packaging.
• Remove the tank lid and extract the inner water tank and water tank. Wash, rinse and
dry them thoroughly.
• Clean the appliance following the first time cleaning instruction in chapter 5.
WARNING: PLEASE DO NOT DISASSEMBLE THIS APPLIANCE BY YOURSELF.
ELECTRIC ELEMENTS WILL BE EXPOSED AND THERE IS A RISK OF ELECTRIC SHOCK.
Positioning of appliance
• Do not install this appliance in a very damp or hot place, or near heat source.
• Place appliance on a �at and even surface.
• Do not use this appliance outdoors. This appliance is only suitable for indoor use.
• WARNING: DO NOT INSTALL THIS APPLIANCE IN DIRECT SUNLIGHT.
• Ensure that the ventilation on both sides is never blocked or covered.
ADD5910M
Micro X-Clean:
AWP210 (1-pack) AWP211 (3-pack) AWP212 (6-pack)
220-240V~
50/60Hz
2200W-2600W
Municipal tap water
I
IPX0
5℃-38℃
04