Sony CLIE PEG-N710C Read This First Manual page 34

Step 6: Performing a HotSync
4
34
Downloaded from:
for the first time
Notes
• Even if the HotSync operation is performed via a USB connector and the
cradle, "Serial" is indicated.
• Do not remove or move your CLIE handheld from the cradle during a
HotSync operation.
• Do not push the HotSync button during a HotSync operation. It might
cause errors and force termination of the operation.
• Do not enter power saving mode during a HotSync operation. If your
computer enters power saving mode during a HotSync operation, the
HotSync Manager will be forced to terminate.
If the HotSync operation does not start
• Make sure that the HotSync
tray on your computer screen and that Local is not selected in the
HotSync shortcut menu.
• If the HotSync icon is not shown in the task tray, click Start, point to
Programs, Sony Handheld, and then click HotSync Manager. Then click
the HotSync button on your CLIE handheld to start the HotSync
operation.
To open the Palm™ Desktop for CLIE software, double-
click the Palm Desktop for CLIE icon on the Windows
desktop or click Start, point to Programs, Sony
Handheld, and then click Palm Desktop for CLIE.
The Palm Desktop for CLIE software starts. All the main
applications on your CLIE handheld are also available in the Palm
Desktop for CLIE software. You can synchronize the information on
your computer with the information on your CLIE handheld.
https://www.usersmanualguide.com/
®
operation
icon is displayed in the Windows task
®