Huawei EchoLife EG8240H5 Quick Start Manual page 7

EchoLife EG8240H5
Quick Start for QR code
No.
1
2
3
4
5
6
Issue 04 (2020-09-22)
NO TE
● The fiber connector connected to the optical port on the wall varies depending on
actual conditions.
● To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30
mm.
Item
On/Off
Power
TEL1-TEL2
LAN1-LAN4
Optical port
Reset
Copyright © Huawei Technologies Co., Ltd.
Description
Powers the ONT on or off.
Connects to a power adapter.
Connects to the ports on a telephone or fax machine.
Connects to PCs or IP set-top boxes (STBs).
The optical port is equipped with a rubber plug and
connected to a fiber for upstream transmission.
The type of the optical connector connected to the
optical port can be SC/APC.
Press the button for a short time to reset the device,
or press the button for a long time (longer than 10s)
to restore the device to the default settings and reset
the device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may
fail to access the Internet. If an ONT cannot access the
Internet after a reset, contact your Internet service provider.
2 Connecting Cables
4