Mount Radiator On A Ceiling - Bosch INTEGRUS User Manual

36 en | Installation
Figure 5.8: LBB 3414/00 wall mounting bracket showing dimensions and drilling pattern
The radiator (plus suspension bracket) is attached to the wall bracket by sliding the mounting
bolt over the slot on the wall bracket and then tightening it (see the next figure). A split pin is
then inserted into a small hole in the bolt to stop it from working loose (see inset in the next
figure).
Figure 5.9: Attaching the radiator to the wall mounting bracket
The vertical angle of the radiator can be adjusted between 0 and 90° in steps of 15°. The
horizontal orientation of the radiator can be adjusted by loosening the bolt then turning the
radiator to the required position.
5.2.5

Mount radiator on a ceiling

The radiators can be attached to the ceiling using the supplied suspension bracket. This
ensures enough space for a proper air flow around the radiator. Mounting a radiator in the
ceiling will in most cases require a forced air flow by means of a ventilator to prevent
overheating. If this is not possible, switch the radiator to half power.
2023-01 | V01 |
User manual
INTEGRUS
Bosch Security Systems B.V.