Motorola MVME2400 Series Installation And User Manual page 20

Preparation and Installation
1
Requirement
Install and connect the
MVME2400x module.
Connect a console terminal.
Connect any other optional
devices or equipment you will be
using.
Power up the system.
Examine the environmental
parameters and make any
changes needed.
Program the MVME2400x
module and PMCs as needed for
your applications.
1-6
Table 1-3. Start-Up Overview (Continued)
Applicable Reference
Installing the MVME2400x Hardware
MVME2400x
Installation Considerations
MVME2400x
Debug Port
Connector Pin Assignments
For more information on optional devices and equipment,
refer to the documentation provided with that equipment.
Installing the MVME2400x Hardware
Status Indicators
If any problems occur, refer to the section
Diagnostic Tests in Chapter 5, PPCBug.
You may also wish to obtain the PPCBug
Diagnostics Manual, listed in Appendix A.
ENV - Set Environment
You may also wish to obtain the PPCBug
Firmware Package User's Manual, listed in
Appendix A.
Preparing the MVME2400x Hardware
Programming
For additional information on PMCs, refer to thePMC
manuals provided with these cards.
You may also wish to obtain the
MVME2400-Series VME Processor Module
Programmer's Reference Guide, listed in
Appendix A.
Computer Group Literature Center Web Site
Page No.
1-12
1-20
1-22
1-20
2-5
C-1
1-12
2-4
5-10
A-1
6-3
A-1
1-7
4-1
A-1