Table of Contents
Advertisement
PQFI & PQFM-cubicles must always be transported vertically. PQFS boxes are transported horizontally.
For PQFS enclosure, follow the procedure below:
– Remove the 4 panel securing screws at the bottom and the top of the enclosure (see
– Remove the right side of the protective cover and put it aside (see
– Unplug the PQF-Manager from the main system (see
put aside.
– Remove the two screws fixing the filter unit to the wooden support (see
– Fix an appropriate lifting device to the eyebolts to lift the filter from the wooden support. It can then be positioned
at the desired location (see
STATUS
Approved
Figure 18: Lifting PQFI/M cubicle(s) by using the lifting lugs
Figure 19
item 5).
SECURITY LEVEL
Public
Figure 19
item 2)
Figure 19
item 3). Then the protective cover can be safely
Figure 19
DOCUMENT ID
9AKK107045A4703
Q UICK STA RT-UP G UI DE
Figure 19
item 1)
item 4)
REV.
LANG.
PAGE
D
en
20/41
© 2022 Hitachi Energy. All rights reserved.
Advertisement
Table of Contents
