Table of Contents
Advertisement
Sub Menu
YCbCr Color Matrix
2 020 Constant
Luminance
2020 Gamut Mapping
H LG System Gamma
Automatic
Sets the matrix conversion method for input signals in YCbCr format.
ITU-R BT.709
ITU-R BT.2020
[Automatic]: Matrix coefficient is set in conformance with the ITU-R
[ITU-R BT.709]: Matrix coefficient is set in conformance with the ITU-R
[ITU-R BT.2020]: Matrix coefficient is set in conformance with the ITU-R
• Setting is disabled when [ACESproxy (ver. 1.0.1)] is selected for [Picture Mode].
Constant Luminance
When [Picture Mode] or [Color Gamut] [ITU-R BT.2020]
Non-constant
Sets the color matrix conversion method.
Luminance
[Constant Luminance]: YUV signals are linearly converted and then
[Non-constant Luminance]: YUV signals are converted into RGB signals
• Not settable in the following cases:
-
-
Gamut Mapping
When [Picture Mode] or [Color Gamut] [ITU-R BT.2020]
Clipping
[Gamut Mapping]: Mapping is performed on colors outside the native
[Clipping]: Colors outside the native color gamut are clipped by a general
Automatic
When [Gamma/EOTF] [Hybrid Log-Gamma]
Manual
Sets the system gamma or peak luminance.
• When Manual is
[Automatic]: When [Hybrid Log-Gamma] is selected, it adjusts the system
selected
[Gamma/EOTF]
[Manual]: When [Hybrid Log-Gamma] is selected, adjusts the system
When [Hybrid Log-
Gamma]
1.000 to 1.500 (1.200)
Setting Options (Bold: factory default)
BT.2020 standard when the [Picture Mode] or [Color Gamut] setting is
[ITU-R BT.2020] and in conformance with the ITU-R BT.709 standard
otherwise.
BT.709 standard.
BT.2020 standard.
converted into RGB signals.
without changing gamma 0.45.
When [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3]
When the [Format] signal method is set to ICtCp or XYZ
color gamut by Canon's unique method.
method.
gamma automatically to match the luminance and HDR range.
gamma. (Increments of 0.005)
The maximum value for each setting becomes the upper limit value of
[HDR Range].
OSD Menu
27
Advertisement
Table of Contents
