Table of Contents
Advertisement
NOTE: For single door models, the door handle must be
completely removed to provide clearance to the cupboard
door and the resulting handle mounting holes hidden with
a cover. Installer must use a tape or plastic cover that suits
the installation appearance (not supplied).
3.
While the slide-housing is taped in position, punch a
small hole in the refrigerator door skin corresponding
to the four (4) holes in the housing (Figure 5).
4.
The holes should be punched, not drilled, to ensure
the maximum thread can be formed in the metal.
5.
Screw four (4) refrigerator screws into the holes
securing the housing in place. The refrigerator screws
are supplied in kit (Figure 6).
If you have a two door refrigerator, repeat this process for
the other door.
Figure 5
Placing refrigerator in cupboard
1.
Ensure cupboard is level and square.
2.
Put refrigerator into cupboard. Use caution and
two people if necessary.
3.
Insert slide bars into slide-housings (Figure 7).
NOTE: Ensure the refrigerator is level in the cupboard.
Raise the front of the refrigerator by using the height
adjusting screws.
1
2
3
4
Figure 6
Figure 7
1
2
3
4
11
Advertisement
Table of Contents
