Changing The Basic Settings - Bosch 300 Series Use And Care Manual

Basic setting
Remote Start
Factory setting
1 Factory setting (may vary according to model)
13.2 Changing the basic
settings
Press
1.
To open the basic settings,
2.
press
a The display shows
Press
3.
til the display shows the re-
quired setting.
Press repeatedly until the
4.
display shows the right value.
You can change one or more
settings.
Display Selection
text
rc1 rc0 - rc2
rE Starting with
YES
Confirming
with
⁠ .
for 3 seconds.
⁠ .
repeatedly un-
Home Connect® en-us
Description
Activate or deactivate
→ "Remote Start ",
Page 31 .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the
ton.
→ "Activating Remote
Start ", Page 31
¡ With the setting "rc2",
the option is perma-
nently activated.
The basic setting is not
available until you have
connected the appliance
with the Home Connect®
app.
→ "Home Connect® ",
Page 29
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
To save the settings, press
5.
for 3 seconds.
14 Home Connect®
Home Connect®
This appliance is network-capa-
Home Connect®
ble. Connecting your appliance to
a mobile device lets you control its
functions via the Home Connect®
app.
The Home Connect® services are
not available in every country. The
availability of the Home Connect®
function depends on the availabil-
ity of Home Connect® services in
but-
29