Read First - NEC GT5000 Control Commands

Read First

The following pages include the 'basic' serial control codes for each model/series of NEC projectors.
Only the basic serial control codes are provided in this document.
NEC does not distribute the 'full' serial control code set.
NEC will supply more advanced control codes upon request.
Please contact the NEC rep you purchased the projector from for more advanced control codes. In your request, you
will need to give specific projector functions that you wish to control and only those codes will be supplied.
nec
For more information visit www.necvisualsystems.com
For Customer Service call (800) 836-0655
NEC is a registered trademark of NEC Corporation.
All other trademarks are the property of their respective owners.
All information is subject to change without notice.
NEC Solutions (Americia), Inc.
Visual Systems Division
1250 Arlington Heights Rd., Suite 400
Itasca, IL 60143-1248 v1.1e