Operating This Product - Frigidaire ESTM028 Use & Care Manual

1. Before use, wash the accessories by clean water, rinse and dry.
2. Place the machine on a flat, clean and dry table, Press the head of the
machine,turn again (or press down) the head-up knob (2) Step1, the upper
body will lift up automatically. (PG 1 & 2).
3. Install the pot cover into the stirring end Step2. of the machine as per PG2
4. Weigh the food and water to be processed into the mixing bowl, then assem-
ble the mixing bowl ( ) on the machine step 3, rotate clockwise until the buckle
is screwed in and locked step 4; (PG3)
Do not exceed the amount of dough - the total weight can hold up to 1.5kg;
Install the required accessories ( ), ( ) and ( ) (only one of the three can be
used at a time) onto the head mixing output shaft (1) step 5, push the accesso-
ries to the top, and then turn a quarter turn counterclockwise to the locking
position step 6; (PG4&5)
7. Press the head of the machine, the machine will automatically lock the head
button (2) step 7, which is in the horizontal position; (PG6).
8. Control speed knob (3) to the position of 0 to make the appliance stop.
9. Then plug in the plug and turn on the power switch.
10. Control speed knob (3) to the required speed - start mixing;
11. After the dough meets the requirements, turn the speed knob (3) back to
gear 0 to finish.
12 2 . . Press the head of the machine by hand, rotate the lifting knob (2)
the upper body, rotate the mixing bowl counterclockwise, remove the mixing bowl
and take out the dough.

Operating This Product

7
lift