NEC DiamondPro 2070SB User Manual page 19

Calibrating Your Monitor
–continued
PC VERSION
Figure 3d
Once the calibration process is finished you will be prompted for the file name of
the ICC profile created from the data measured from the monitor (Figure 3d).
The default file name will use the monitor's model number (for example, FP1375X ,
FP955, or DP2060u).
Once the file name is selected click "Save" to finish the installation.
Once the initial calibration is complete the option to adjust the monitor to the
ambient lighting conditions is available. The Ambient function is used to adjust
the brightness control to maximize visibility of shadow detail in images. Since
room light washes out this detail, an increase in brightness is necessary to make
the detail visible. However, since increasing the brightness control decreases
gamma, use this function carefully.
19