Table of Contents
Advertisement
Elevate the bag if necessary using an item such as
6.
a chopping board to prevent the bag from sliding
down.
Touch to select the vacuum-sealing level.
7.
Touch
to select the heat-sealing time.
8.
Tightly close the glass lid and hold it there for a few
9.
seconds.
Touch
to start the vacuum-sealing process.
10.
a The vacuum-sealing process starts. The vacuum-
sealing level indicators pulsate in orange one after
the other until the selected value has been reached.
a The heat-sealing process starts. The vacuum-sealing
level indicators pulsate in orange one after the other
until the selected level has been reached.
a The vacuum-sealing process can take up to
two minutes.
a At the end of the process, the compartment is ventil-
ated. An audible signal sounds.
Once the vacuum-sealing process is finished, open
11.
the glass lid.
12.
WARNING ‒ Risk of burns!
The heat-sealing bar in the vacuum-sealing compart-
ment becomes extremely hot if the appliance is
used frequently and there are long heat-sealing
times.
Never touch the hot heat-sealing bar.
▶
Keep children at a safe distance.
▶
Remove the heat-sealed vacuum-sealing bag from
the compartment.
After vacuum-sealing, check the heat-sealing seam
13.
on the bag.
Carefully pull the seam apart.
‒
8 Vacuum-sealing in the container
In the container, vacuum-sealed food has a longer shelf
life.
8.1 Vacuum-sealing in the container
Vacuum-seal the food in a suitable vacuum-sealing
container in order to preserve the food for longer.
Open the glass lid.
1.
Plug the vacuuming adaptor into the air outlet.
2.
Vacuum-sealing in the container en
If the seam does not stay together, select a
‒
higher heat-sealing level.
If the seam is deformed, select a lower heat-seal-
‒
ing level or leave the appliance to cool down.
Note: If you vacuum-seal food in bags several times in
succession, the heat-sealing bar becomes increasingly
hotter. This may impair the quality of the heat-sealing
seam. After several vacuum-sealing processes, select a
lower heat-sealing time or leave the appliance to cool
for approx. two minutes between the processes.
7.4 Early heat-sealing
Use this function if you only want to pack your delicate
food in a bag so that it is air-tight, without the contents
sitting too tightly against the bag.
To stop the vacuum-sealing process and heat-seal
1.
the bag early, touch
a The appliance displays the vacuum-sealing level un-
til it is reached.
a At the end of the process, the compartment is ventil-
ated.
a An audible signal sounds.
Open the glass lid.
2.
Remove the heat-sealed vacuum-sealing bag from
3.
the compartment.
Note: To heat-seal the bag, the vacuum-sealing drawer
requires a specific degree of vacuum.
If you touch
first, the vacuum-sealing drawer pumps
air out of the compartment until this degree has been
reached. The bag is then heat-sealed.
7.5 Cancelling the vacuum-sealing process
in the bag
To cancel the vacuum-sealing process early, touch
1.
.
a The appliance displays the vacuum-sealing level un-
til it is reached.
a The bag is not heat-sealed.
a The lid opens slightly and the compartment is ventil-
ated.
a An audible signal sounds.
2.
Remove the vacuum-sealing bag from the compart-
ment.
Secure the hose to the vacuuming adaptor and the
3.
vacuum-sealing container.
.
7
Advertisement
Table of Contents
