Operation; Understanding The Air Quality Light Ring; Switching On/Off; Changing The Mode Setting - Bosch Air 4000 Installation Instructions Manual

Hide thumbs Also See for Air 4000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 41
2.
1.
Fig. 54 Pulling the bottom cover and removing the plastic cover
2.
1.
Fig. 55 Reapplying the bottom cover
▶ Lay the appliance horizontally on a steady surface.
Air 4000 – 6721848798 (2022/11)
3.
0010043099-001
0010043102-001
▶ Rotate and pull the bottom cover from the appliance.
▶ Pull the filter from the appliance.
▶ Remove the plastic cover of the air purification filter.
▶ Insert the filter back into the appliance.
▶ Reapply the bottom cover.
4

Operation

4.1

Understanding the air quality light ring

The light ring indicates the air quality. It lights up all colours in sequence,
when the air purifier is switched on. After approximately 30 seconds, the
particle sensor selects the color that corresponds to the surrounding air
quality of airborne particles, according to table 2.
PM2.5
PM2.5 refers to ultra-fine airborne particle pollutants smaller than 2.5
micrometers. Most of the indoor air pollutants fall under PM2.5 like:
tobacco smoke, cooking and burning candles, some airborne bacteria
and the smallest mold spores, pet allergen and dust mite allergen
particles also fall under PM2.5.
The air quality sensor scans the air continuously to detect the ultra-fine
particles. This information is reported continuously in both the digital
display and the light ring, providing real-time PM2.5 feedback.
Air quality light color Air quality level
Blue
Good
Purple
Ok
Orange
Poor
Red
Bad
Table 14 Air quality light colors and PM2.5 levels
4.2

Switching ON/OFF

▶ Insert the plug of the air purifier in the power socket.
▶ Touch
to switch on the air purifier.
▶ Press the
button again, to switch off the air purifier.
Note
• For optimum purification performance, close the doors and the
windows.
• Keep curtains away from the air inlet or air outlet.
• The air purifier will operate in Auto mode by default.
4.3

Changing the mode setting

Auto-mode
• In Auto-mode, the air quality is registered in real-time, and the
appliance automatically adjusts the fan speed in accordance to the
ambient air quality.
Manual mode
• In Manual mode, it is possible to set the fan speed (between Speed 1
and Speed 3). Press the
Quiet mode
• In Quiet mode, the air purifier operates quietly at a low speed and all
the lights are dimmed.
Timer mode
• In Timer mode, it is possible to set the timer (between 1 and 12
hours) for the equipment shut off.
Operation
PM2.5 level
0-12
13-35
36-55
>56
button to change to the desired speed.
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

A4000 g

Table of Contents