Using The Total Cups Counter - Electrolux AEG CP 2 Series Operating Instructions Manual

822_949_318 CP2..._defnep.book Seite 45 Freitag, 2. November 2007 6:30 18
Increase the coffee quantity, see
„Changing and Saving the Coffee
Quantity" page 38.
– The grinding texture is set too
coarse. Set the grinding texture to a
finer grade, see „Setting the
Grinding Texture" page 38.
• ...the crema is too weak?
– Use fresh water.
– Use fresh beans or fresh coffee pow-
der.
– Clean the coffee-making unit, see
„Cleaning the Coffee-making Unit",
page 41.
• ...milk is not frothy enough?
– The milk is too hot or too old or the
fat content is too high. Use suitable
milk.
– Blocked steam nozzle. Clean the
steam nozzle, see page 37.
– The air intake in the frothing aid is
blocked. Clean the frothing aid, see
page 37.
• ... the bean container will not locate
on the grinder?
– Coffee bean residue on or around
the grinder: Remove coffee bean
residue from the grinder, see
page 40.
– Coffee bean residue is jammed in the
bean container lock. Clear the bean
container lock of coffee bean residue.
• ... the grinder makes very loud noises
when grinding?
– The grinder is blocked by a foreign
body. Remove the foreign body as
described in this manual, refer to
„Cleaning the Grinder" page 40. If
necessary, have the coffee machine
checked by the Customer Service
Centre.
– You can continue to use your coffee
machine with ground coffee.
• ... the coffee-making unit will not
come out?
– The coffee-making unit is not in the
base position.
– Re-assemble the appliance and
switch on.
– Now switch the appliance off
again in the normal way. The
coffee-making unit runs to the
base position.
– Remove the coffee-making unit,
refer to „Cleaning the Coffee-
making Unit", page 41.
• ... the coffee-making unit will not fit
back in?
– The coffee-making unit is not closed.
Turn the service lever to close the
coffee-making unit.
– The latching lever is not up. Push the
metal clip up, and insert the coffee-
making unit, see page 42.
• ... the coffee machine has to be
transported?
– Keep the original packaging as
transport protection. It is important
to use the original film as a protec-
tion against scratches.
– Secure the coffee machine against
jarring.
– Empty the coffee machine tank and
container and allow any remaining
moisture in the system to steam off.
This will protect your coffee machine
from being damaged by freezing in
cold weather.
To steam off the system, remove
water tank and then select the
steam function. When no more
steam is released, turn off the steam
tap and switch off the coffee
machine. Allow the appliance to cool
before packing.
– Care should also be taken with the
location of the coffee machine –
especially in cold weather, when
damage can be caused by freezing.
17 Using the Total Cups
Counter
The coffee machine has the facility to
display the total number of cups of
coffee made.
g
45