Table of Contents
Advertisement
Available languages
Available languages
off and removed while the chassis continues
functioning.
Step 1: Connect the supplied AC power cord to the
back of the chassis and attach the plug into a standard
AC outlet with a voltage range from 100~240Vac.
Step 2: Turn on the chassis system by flipping the
switch beside the receptacle to ON position. The LED
on the front panel of the device will come on then.
Installing and Removing the Power Supply
NOTE: хou have to disconnect the power cord from the
chassis before installing or removing a power supply.
To install a power supply to the chassis, you have to
fasten the hand screw clockwise and slide in the power
supply to the chassis.
To remove a power supply out the chassis, you have to
loose the hand screw counter clockwise and pull out the
power supply from the chassis.
LEDs
The front panel LEDs provide instant status feedback,
monitoring and troubleshooting when needed.
5
Advertisement
Table of Contents
