Status Light Indicator - Motorola MX240a User Manual

Note: The base unit does not contain a battery. It receives
its power from the USB port.
Action
1 Plug the charger into the charging connector at
the back of the handheld unit.
2 Plug the other end of the charger into an
electrical outlet.

Status Light Indicator

The status LED glows red when the battery is charging.
The status LED flashes red and a low battery indicator
displays on the screen when there is approximately
10 minutes of operational use remaining in the handheld
unit.
Battery Performance
• Always use Motorola Original batteries and battery
chargers. The warranty does not cover damage
caused from using non-Motorola batteries and/or
battery chargers.
• Some batteries perform best after several charge and
discharge cycles.
• New batteries or batteries that have been stored for
long periods of time may require a longer charge time.
• Maintain the battery at or near room temperature
when charging.
• Do not expose batteries to temperatures below –10°C
(14°F) or above 45°C (113°F).
13