Motorola DCT5100 Setup Manual page 4

THE DCT5100 FRONT PANEL
The DCT5100 front panel has 12 keys and an LED display. Use the keys to perform basic functions such as access to the electronic
program guide, navigate menus, and purchase Pay-Per-View events. The table following this drawing describes each key and its use.
There are also inputs for a Universal Serial Bus (USB), audio/video jacks and a Smart Card slot. These inputs are for future applications
under development and are not enabled on this unit.
Key Description
1 LED Displays the channel number or time of day.
There are four indicator lights on the LED screen:
• MSGS. — the DCT5100 has received messages for you to read
• A/B — the RF bypass is active
2 CURSOR Moves the cursor around the program guide and menu screens.
3 MENU Displays the main menu.
4 POWER Turns the device on or off.
5 INFO Displays the current channel and program information.
6 A/B Use to manually enable the RF bypass function. You must have a cable-ready TV for this function to operate.
7 SELECT Selects menu options, on demand programming, Pay-Per-View events or programs from the program guide.
8 GUIDE Displays the program guide.
9 CHANNEL + Changes the channels by moving up or down.
CHANNEL -
10 SMART CARD This interface is intended to support electronic commerce activity utilizing a Smart Card.
SLOT
1
2 3 4 5 6 7 8 9
• ON — the DCT5100 is powered on
• REMOTE — the remote control is in use
(Optional.)
(Not enabled on this unit.)
10