Table of Contents
Advertisement
Parameters
PB-83 Defined Parameters (4)
Array [116]
No keypad access
Read only
Range:
Function:
0 N/A
[0 - 9999 N/A] This parameter displays a list of all the
*
defined frequency converter parameters
available for PROFINET.
PB-84 Defined Parameters (5)
Array [115]
No keypad access
Read only
Range:
Function:
0 N/A
[0 - 9999 N/A] This parameter displays a list of all the
*
defined frequency converter parameters
available for PROFINET.
PB-90 Changed Parameters (1)
Array [116]
No keypad access
Read only
Range:
Function:
0 N/A
[0 - 9999 N/A] This parameter displays a list of all the
*
drive parameters deviating from default
setting.
PB-91 Changed Parameters (2)
Array [116]
No keypad access
Read only
Range:
Function:
0 N/A
[0 - 9999 N/A] This parameter displays a list of all the
*
drive parameters deviating from default
setting.
PB-92 Changed Parameters (3)
Array [116]
No keypad access
Read only
Range:
Function:
0 N/A
[0 - 9999 N/A] This parameter displays a list of all the
*
drive parameters deviating from default
setting.
PB-94 Changed Parameters (5)
Array [116]
No keypad Address
Read only
Range:
Function:
0 N/A
[0 - 9999 N/A] This parameter displays a list of all the
*
drive parameters deviating from default
setting.
PROFINET Operating Instruction
8.3 Parameter Group EN-## Ethernet
EN-00 IP Address Assignment
Option:
[0]
MANUAL IP-address can be set in EN-01 IP Address IP
*
[1]
DHCP
[2]
BOOTP
[10]
DCP
*
EN-01 IP Address
Range:
0 N/A
*
EN-02 Subnet Mask
Range:
0 N/A
*
EN-03 Default Gateway
Range:
0 N/A
*
EN-04 DHCP Server
Range:
0 N/A
*
EN-05 Lease Expires
Range:
0 N/A
*
EN-06 Name Servers
Range:
0 N/A
*
Function:
Selects the IP Address assignment method.
Address.
IP-address is assigned via DHCP server.
IP-address is assigned via BOOTP server.
DCP Assigned vis the DCP protocol.
Function:
[0 - 2147483647 N/
Configure the IP address of the
A]
option. Read-only if EN-00 IP Address
Assignment set to DHCP or BOOTP.
Function:
[0 - 2147483647 N/
Configure the IP subnet mask of the
A]
option. Read-only if EN-00 IP Address
Assignment set to DHCP or BOOTP.
Function:
[0 - 2147483647
Configure the IP default gateway of the
N/A]
option. Read-only if EN-00 IP Address
Assignment set to DHCP or BOOTP. In a
non routed network this adress is set to
the IP adress of the IO Device
Function:
[0 - 2147483647 N/A] Read only. Displays the IP address
of the found DHCP or BOOTP
server.
Function:
[0 - 0 N/A] Read only. Displays the lease-time left for the
current DHCP-assigned IP address.
Function:
[0 - 2147483647 N/A] IP addresses of Domain Name
Servers. Can be automatically
assigned when using DHCP.
8
8
39
Advertisement
Table of Contents
