Quick Tips; Troubleshooting - Motorola HF800 Quick Start Manual

QUICK TIPS

To answer or end a call, press the
Call E button on the handsfree device.
To adjust the volume, scroll the Volume button
up or down.
To mute a call, press the Mute button.
To turn off the handsfree device, press and hold
the Volume/Power button for 2 to 3 seconds until
the Call button LED turns off. A tone sounds as
the device turns off.
To conserve battery power, turn off the
handsfree device when you will not be using it for
an extended time.
To use the holster as a stand, press and hold the
top of the clip in until it opens completely. Then,
slide the square tab in the center of the clip up
until it snaps into place. You can now stand the
handsfree device upright on a flat surface.
Guide de
démarrage rapide
Dispositif mains libres
Bluetooth
HF800/820
MD
Connectez-vous en
5 étapes faciles
1 – CHARGEZ
2 – ALLUMEZ
3 – DÉMARREZ
BLUETOOTH
4 – APPARIEZ
5 – TESTEZ ET
UTILISEZ

TROUBLESHOOTING

My phone does not find my device.
Make sure your handsfree device is in pairing mode
before looking for devices on your phone
(see step 4).
My device worked before but now it's
not working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 3). If
the Bluetooth feature has been turned off or was
turned on only temporarily, you may need to restart
the Bluetooth feature (see step 3) and pair your
phone and handsfree device again (see step 4).
FOR DETAILS ABOUT YOUR HANDSFREE
DEVICE
See the User's Guide or visit us at
www.hellomoto.com/bluetooth and click Support.
1
votre dispositif mains libres
Avant d'utiliser ce produit, veuillez lire et suivre les directives de
la section « Consignes de sécurité et information juridique » du
guide de l'utilisateur de votre téléphone.
Avant de l'utiliser,
chargez votre dispositif
mains libres pendant
2 heures :
1
Connectez le chargeur Motorola à l'arrière du
dispositif, la patte de déclenchement vers le
haut. Une minute environ après le début du
chargement, l'indicateur à DEL de sourdine
s'allumera. Cet indicateur s'éteindra lorsque le
dispositif sera chargé à pleine capacité (après
environ 2 heures).
2
Débranchez le chargeur.
CHARGEZ