Calibrating the Screen
After you turn your phone on for the first time, calibrate the
screen.
Press
h u
1
2 Display Setup
3 Calibrate Screen
Press the center of the target until it disappears. If you
want to calibrate the screen each time you turn the phone
on, check Redo on Power Up .
Changing Between PDA and Phone
Mode
Your phone can operate in phone mode or PDA mode. In
phone mode, you can use all of your phone's features. In
PDA mode, you cannot make phone calls or send
messages.
The antenna indicator in the status bar shows T for
phone mode or
press the icon and select Antenna On to switch to phone
mode, or Antenna Off to switch to PDA mode. Press
Cancel
to keep the current mode.
for PDA mode. To change the mode,
21