DeWalt D26203 Original Instructions Manual page 34

EnGLIsH
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code 25 , which also includes the year of manufacture,
is printed into the housing.
Example:
2022 XX XX
Year of Manufacture
Description (Fig. A–M)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Quick release tabs
1
Depth adjustment ring
2
Variable speed dial
3
On/Off (I/O) switch
4
Spindle lock button
5
LED lights
6
Guide pin groove
7
Micro adjustment scale
8
Locking lever
9
Parallel fence slot (fixed base)
10
Subbase
11
[the round subbase 32
available as accessories.]
Vacuum attachment (for use with plunge base)
12
Holes for premium parallel fence (D26203, D26204)
13
Turret stop
14
Depth adjustment rod
15
Plunge lock lever
16
Parallel fence
17
Guide pins
18
Locking lever adjustment screw
19
Centering tool
20
Collet nut
21
Vacuum attachment (fixed base)
22
Screws (vacuum attachment, fixed base)
23
Parallel fence slot (plunge base)
24
Date code
25
Motor unit
26
Motor stop
27
Thumb screw
28
Knurled knob
29
32
and the D‑shaped subbase
Depth adjustment scale
30
Zero adjuster tab
31
Round subbase
32
D‑shaped subbase
33
Tab (vacuum attachment, plunge base)
34
Snap tab (vacuum attachment)
35
Plastic washer (vacuum attachment)
36
Thumb screw (vacuum attachment)
37
Subbase screws
38
Parallel fence screws
39
Intended Use
Your heavy‑duty compact router has been designed for
professional heavy duty routing of wood, wood products
and plastics.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These compact routers are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
33 are
installing attachments or accessories. Be sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.
Cutters
The tooling can be used with the complete range of commercial
cutters (e.g, straight, rebate, profile cutter, slotter cutter or
grooved knife) with the following technical data:
1. Shank diameter 6–8 mm
2. Cutter speed of min. 30000/min

WARNING: Max diameter to use:
• For straight-cutters, rabbet-cutters, profile cutters,
the maximum shank diameter MUST be 8 mm, the
maximum diameter MUST be 30 mm, the maximum
cutting depth MUST be 10 mm.
• For slotter cutters, the maximum shank diameter
MUST be 8 mm and the maximum diameter MUST
be 25 mm.
• For grooved knives, the maximum shank diameter
MUST be 8 mm, the maximum diameter MUST be
30 mm and the maximum cutting width MUST be
4 mm.