Table of Contents
Advertisement
Programming The Controller – 4
To rename Program 1, touch the PROGRAM 1 box. A pop-up
keypad will appear as shown in Figure 12.
Figure 12 - This keypad allows you to type in specific names for your programs. Up
to 12 characters/spaces can be used for each name.
Because the keypad is not large enough to hold all 26 letters of
the alphabet, multiple keypads are provided as shown in
Figure 13.
First keypad
Second Keypad
Figure 13 - Sequence of multiple keypads.
next keypad in sequence.
If you require a space in the program name, use the blank key
provided on the third keypad.
Third Keypad
An Advance key is provided on the bottom row of
each keypad. Touching this key will advance to the
18
RELEASED Version
Fourth Keypad
©Toro 2006-2006
Advertisement
Table of Contents
