en-us Basic settings
Basic setting
Remote Start
Factory setting
1
Factory setting (may vary according to model)
14.2 Changing the basic
settings
Open the appliance door.
1.
Press
2.
To open the basic settings,
3.
press
a The display shows Hxx.
a The display shows
Press
4.
til the display shows the re-
quired setting.
Press
repeatedly until the
5.
display shows the right value.
32
Display
Selection
text
rc1
rc0 - rc2
rE
Starting with
YES
Confirming
with
.
for 3 seconds.
.
repeatedly un-
Description
Activate or deactivate
→ "Remote Start ",
Page 34 .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the
ton.
→ "Activating Remote
Start ", Page 34
¡ With the setting "rc2",
the option is perma-
nently activated.
The basic setting is not
available until you have
connected the appliance
with the Home Connect®
app.
→ "Home Connect® ",
Page 33
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
You can change one or more
settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
but-