UNIT CONTROLLER (PC-ARFH2E)
•
Select No when the device acts as Room Thermostat only. It does not control the unit.
•
Press OK button.
•
Select No when the device is not used as a room thermostat.
•
Select Yes, in zone 1/ Yes, in zone 2 / Yes, in both zones, depending on the number of circuits controlled.
•
When select Yes, in both zones, jump to screen 8.
•
Press OK button.
•
Select the number of circuits (1 or 2) .
•
Press OK button.
•
Select the heat emitters on the circuit 1: Underfloor heating, Fan coils or Radiators.
•
Repeat this step in case of circuit 2.
•
Press OK button.
178
PMML0575 rev.2 - 03/2022