Issue 3.01
___________________________________________________________________________________
3.
2) Beginning station port
3) Ending station port
4) The first station number
1.
2.
3.
4.
5.
___________________________________________________________________________________
B - 6
When the new "MultiAssign" icon is pressed in System/Numbering/Stations, a
screen similar to the one below will be presented. Note the default ports for
extension assignment is 1~128.
5)Click Apply
Figure B-4 MultiAssign - Extension Numbers Example
Select drop down to select the Extension type.
Assign the beginning port number.
Assign the ending port number.
Assign the first Extension in the range.
Click Apply.
1) Drop down to select extension type
NEC SL1100