Connecting Cables - Huawei Camera 500 Manual

4

Connecting Cables

• Connect the Camera 500 to the Box 600 through an HT-TX port.
• Connect the Camera 500 to the Box 300 through an HDMI port.
Power
cable
5
Performing a Power-on Check
After the cables are connected, power on the Camera 500. The power indicator turns green and the
Camera 500 starts automatically.
Blinking green
Indicator
Off
(twice/second)
Powered
Status
off
Box 600
Power
adapter
Box 300
Do not manually rotate the camera PTZ or prevent it from rotating when the
Camera 500 is being powered on or running.
Rapidly blinking
green
(4 times/
second)
Starting Upgrading...
SIP NO. ！
081599990
Network
cable
SIP NO. ！
081599990
Blinking green,
Steady
gradually brighter
green
or dimmer
Breathing light
Running On standby
5
Network
cable
HDMI cable
Slowly
Blinking red
blinking red
(twice/
(once/
5 seconds)
5 seconds)
Hardware
Overheated
error
Rapidly
blinking red
(4 times/
second)
Software
error