Table of contents 1 Safety .......... 4 10 Before using for the first time........ 33 1.1 General information.... 4 10.1 Starting an empty washing 1.2 Intended use....... 4 cycle ........ 33 1.3 Restriction on user group... 4 1.4 Safe installation ...... 5 11 Laundry........ 34 1.5 Safe use ........ 7 11.1 Preparing the laundry ..... 34 1.6 Safe cleaning and mainten-...
Page 3
14 Childproof lock...... 41 14.1 Activating the childproof lock ......... 41 14.2 Deactivating the childproof lock ......... 41 15 Basic settings...... 43 15.1 Overview of basic settings .. 43 15.2 Changing the basic set- tings........ 44 16 Cleaning and servicing .... 44 16.1 Tips on appliance care... 44 16.2 Cleaning the drum.... 44 16.3 Cleaning the detergent...
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
Page 6
en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
Page 8
en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
Safety en CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. ▶ Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products.
en Preventing material damage Make sure that the length of the ▶ Preventing material damage 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Follow these instructions to avoid ma- Preventing material damage able to operate properly.
Environmental protection and saving energy en Remove all detergent residue, Reduce the washing temperature for ▶ spray residue or other residues im- lightly and normally soiled laundry. mediately if they come into contact a At low temperatures, the appliance with the appliance. consumes less energy.
en Installation and connection Remove any packaging and pro- Installation and connection 4 Installation and con- tective covers completely from the appliance. nection For the environmentally friendly Installation and connection disposal of the packaging materi- 4.1 Unpacking the appliance als, observe the information on the topic of Note: Please read the information in → "Disposing of packaging",...
Installation and connection en 4.2 Contents of package After unpacking all parts, check for any damage in transit and completeness of the delivery. Washing machine WARNING Risk of electric shock! Accompanying documents The appliance contains live parts. Touching live parts is dangerous. Water inlet hose Do not operate the appliance ▶...
en Installation and connection ATTENTION! Installation loca- Requirements If the appliance is installed in areas tion exposed to frost or outdoors, frozen On a wall Do not trap the residual water may damage the appli- hoses between ance and frozen hoses may crack or the wall and the split.
Installation and connection en Unscrew and remove all four Put on the four cover caps. screws for the transit bolts with a WAF 13 wrench. Press down on the four cover caps. Pull the power cord out of the holder. 4.5 Removing the transport Remove the four sleeves.
en Installation and connection Unscrew and remove the screws in Remove the transport strut. the vertical transport struts using a T20 screwdriver. 4.6 Connecting the appliance Remove the transport struts. Connecting the water inlet hose Note ¡ Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sec- tions to ensure that you use the...
Installation and connection en Connect the water inlet hose to a Drainage into a Fix and secure tap (26.4 mm = 3/4"). washbasin the water outlet using an elbow. ¾˝ min. 10 mm Drainage into a Fix and secure plastic pipe with the water outlet min.
en Installation and connection To align the appliance, turn the ap- The connection details of the appli- pliance feet. Check that the appli- ance can be found under Tech- ance is level using a spirit level. nical data → Page 64. Check the mains plug is inserted properly.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance 5.2 Detergent drawer Measuring aid for liquid deter- gent → "Using a measuring aid for liquid detergent", Page 38 Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡ Fabric softener ¡...
Display en Display 6 Display The display shows the current settings, options or relevant information. Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time The programme end has been set and the remaining number of hours is displayed.
Page 22
en Display Display Designation Description End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 41 ...
Buttons en Buttons 7 Buttons The selection of programme settings depends on the programme that is set. Buttons You can see the selection options for each programme in the overview for → "Programmes", Page 25. Button Selection Description Έναρξη/ ¡ Start Start, cancel or pause the pro- Προσθήκη...
Page 24
en Buttons Button Selection Description Κλείδωμα 3 δευτ. ¡ Activate Activate or deactivate the childproof (Child Lock 3 lock. ¡ Deactivate sec.) Disable the control panel to prevent unwanted or accidental operation. If the childproof lock is activated and the appliance has been switched off, the childproof lock remains activated.
Accessories en Accessories 9 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. 2.50 Fixing brackets Improves the stability of WMZ2200 the appliance.
en Laundry Pour washing powder into com- Laundry 11 Laundry partment II. Laundry 11.1 Preparing the laundry Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely. ATTENTION! Objects remaining in the laundry may damage the laundry and the drum.
Laundry en – Separate items of laundry and – Type of fabric and fibre shake them out, or observe the Wash laundry of the same programme description type of fabric and fibre to- gether. – Care symbols on the care labels 11.2 Sorting laundry → Page 35 Note: Please read the information in...
en Detergents and care products Symbol Washing process Recommended pro- gramme Not suitable for machine-washing – Notes Detergents and care products 12 Detergents and care ¡ Only use liquid detergents that are self-flowing products ¡ Do not mix different liquid deter- gents Detergents and care products Note: Please read the information in ¡...
Basic operation en 12.2 Detergent dosage The detergent dosage depends on: You can find out how hard your ¡ The amount of laundry water is from your local water com- pany or measure it yourself using ¡ Degree of soiling a water hardness tester. ¡...
en Basic operation Note: The drum is lit up after the Requirement: The laundry is pre- door is opened and closed and once pared and sorted. the programme has started. The light → "Laundry", Page 34 goes out automatically. Open the door. 13.2 Setting a programme Set the programme selector to the required programme.
Basic operation en Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. Insert the detergent drawer. Push in the detergent drawer. 13.7 Adding detergent and care product Notes...
en Basic operation Pour in detergent. The appliance is paused and → "Detergent drawer", Page 20 checks whether it is possible to add or remove laundry. Take note If required, add the care product. of the programme status. Push in the detergent drawer. Add or remove laundry.
Childproof lock en Wipe the rubber gasket dry and re- 13.13 Unloading the laundry move any foreign objects. Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely. Open the door. Remove the laundry.
Page 42
en Childproof lock So that the programme currently running is not cancelled, the pro- gramme selector must be set to the initial programme. goes out in the display.
Basic settings en Basic settings 15 Basic settings You can configure the appliance to meet your needs. Basic settings 15.1 Overview of basic settings Below is an overview of the basic settings on your appliance. Basic setting Programme posi- Value Description tion End signal 0 (off) Set the volume of 1 (quiet)
en Cleaning and servicing 15.2 Changing the basic set- Remove all de- Fresh deposits tergent residue, are easier to re- tings spray residue or move without Set the programme selector to po- other residues leaving any sition 1. immediately. residue. Keep the appli- This allows the ance door and residual water to...
Cleaning and servicing en Press down on the insert and re- Fit the insert and lock it into place. move the detergent drawer. Cleaning the opening for the deter- Press out the insert upwards from gent drawer. below. Push in the detergent drawer. Clean the detergent drawer and in- sert with water and a brush, and 16.4 Descaling...
en Cleaning and servicing Slide a sufficiently large receptacle 16.5 Cleaning the drain pump under the opening. Clean the drain pump in the event of faults, e.g. blockages or rattling noises. Emptying the drain pump Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely.
Page 47
Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Note: Please read the information in ures, the detergent solution gets the Safety → Page 4 and Preventing hot. material damage → Page 10 sections Do not touch the hot detergent to ensure that you use the appliance ▶...
en Cleaning and servicing Ensure that both impellers can Insert the maintenance flap and turn. lock it into place. Insert the pump cap. Close the maintenance flap. Ensure that the parts of the ‒ 16.6 Cleaning the intake pump cap are correctly as- sembled.
Cleaning and servicing en Disconnect the appliance's mains 16.8 Clean the water inlet fil- plug from the power supply. ters. Loosen the hose clamp and care- fully remove the water outlet hose. Emptying the water inlet hose Turn off the tap. Set a programme, except for Ξέβγαλμα, Στύψιμο...
Page 50
en Cleaning and servicing Clean the filter with a small brush. Disconnect the hose from the rear of the appliance. Connect the water inlet hose and check for leaks. Use pliers to remove the filter. Clean the filter with a small brush. Cleaning the filter on the appliance Note: Please read the information in...
Page 51
Cleaning and servicing en Connect the hose and check for leaks.
en Troubleshooting Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 53
Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" Remove any unapproved extensions from the water ▶ hose. Connecting the appliance "E:36 / -25 / -26" Drain pump is blocked. → "Cleaning the drain pump", Page 46 ▶ "E:38 / -25 / -26" Drain pump is blocked.
Page 54
en Troubleshooting Fault Cause and troubleshooting flashes. Door is not closed. Close the door. Press Έναρξη/Προσθήκη ρούχων to start the programme. All other error codes. Malfunction Call the after-sales service. ▶ → "Customer Service", Page 62 The appliance is not The mains plug of the power cord is not plugged in. working.
Page 55
Troubleshooting en Fault Cause and troubleshooting The door cannot → "Cancelling the programme", Page 40 ▶ be opened. Water level is too high. Start the Άντληση programme. ▶ Power failure. Open the door using the emergency release. ▶ → "Emergency release", Page 60 The water is not drain- Drain pipe or water outlet hose is blocked.
Page 56
en Troubleshooting Fault Cause and troubleshooting Water is not flowing The tap is turned off. in. Detergent is not Turn on the tap. ▶ being dispensed. The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or ▶...
Page 57
Troubleshooting en Fault Cause and troubleshooting Drum does not turn, Load detection is active. water does not flow in. Not a fault – no action required. ▶ Note: The load detection can take up to two minutes. Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶...
Page 58
en Troubleshooting Fault Cause and troubleshooting Loud noises during Appliance is not correctly aligned. the spin cycle. Aligning the appliance ▶ The appliance feet are not fixed. Secure the appliance feet. Aligning the appliance ▶ Transit bolts have not been removed. Removing the transit bolts ▶...
Page 59
Troubleshooting en Fault Cause and troubleshooting The spin result is not Ensure that the drain pipe and water drain hose are ▶ satisfactory. The laun- not kinked or trapped. dry is too wet/too The unbalanced load detection system has interrupted damp. the spin cycle because the laundry is unevenly distrib- uted.
en Transportation, storage and disposal Drain the remaining detergent 17.1 Emergency release solution. Releasing the door → "Cleaning the drain pump", Page 46 Requirement: The drain pump is Detach the hoses. empty. → Page 46 ATTENTION! Escaping water may 18.2 Inserting the transit cause material damage. bolts Do not open the door if you can ▶...
Transportation, storage and disposal en Insert all screws into the four 18.4 Disposing of old appli- transit bolts and tighten slightly. ance Valuable raw materials can be re- used by recycling. WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk.
en Customer Service Make a note of your appliance's de- Customer Service 19 Customer Service tails and the Customer Service tele- phone number to find them again If you have any queries on use, are Customer Service quickly. unable to rectify faults on the appli- ance yourself or if your appliance needs to be repaired, contact Cus- tomer Service.
Consumption values en Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
en Technical specifications You can find more information about Technical specifications 21 Technical specifica- your model online at https:// eprel.ec.europa.eu/ . This web ad- tions dress is linked to the official EU EPREL product database. At the time Technical specifications Appliance height 85,0 cm of printing, its web address had not Appliance width 60,0 cm...
Page 68
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.