Table of Contents
Advertisement
7.5.2 Sleep Mode Details Setting
This function is used to set "Off Timer" in the sleep mode.
NOTE
• The default value of "Off Timer" is 8 hours.
• Refer to "Set the sleep mode ON/OFF".
1 Enter "Sleep Mode Details Setting" by selecting "04" as the item number.
2 Press
to increase or decrease 30 minutes of each step for 3.0 to 8.0 hours.
" " or " "
3 Press " " to save the setting and the item number "02" starts to flash.
4 Press " " (On/Off) once, or press " " for 3 seconds to return to the home screen.
7.6 Autoboost Setting
This function increases the cooling or the heating capacity for 30 minutes since the beginning
of operation, in order to reach the setting temperature in the room as quickly as possible. It is
only available when the operation mode is cooling or heating. This function makes operation
begin with "Autoboost" option every time ON operation is set, until this function is deactivated
(Autoboost setting = "Not Set").
NOTE
• Autoboost cannot be set when the outdoor unit does not support this function.
• Autoboost cannot be used if Power Savings is not supported.
• When quick function is activated while mode is "Cool", fan speed changes and is locked as
"Auto" for 30 minutes at the longest regardless of the current setting. While in this operation (fan
speed "Auto"), fan level may drop as low as "Low" when the room temperature gets close to the
setting temperature. The operation starts regardless of the fan speed.
• The wired remote controller only supports the function of "Quick + Heat" in the AutoBoost mode.
PMEN0630 rev.0 - 07/2022
Item No.
Set Value
Icon
7
26
Advertisement
Table of Contents
