Logitech ZONE VIBE 125 Setup Manual page 6

CONNECT YOUR HEADPHONES
a. Connect via USB-A receiver
1 Insert the receiver into the computer USB-A port
Or insert the USB-A receiver with the USB-C
adapter to the USB-C port
2 Zone Vibe 125 is already paired to the receiver
it ships with
3 Once successfully paired, the LED light on
the receiver will turn solid white
b. Connect via BLUETOOTH
1 Slide the switch to the bottom in the arrow's
direction for 2 seconds to initiate pairing
2 The LED light will flash white rapidly
3 Open Bluetooth settings on your device
®
4 Select Logi Zone Vibe 125 in discoverable devices
5 Once successfully paired, the LED light will turn
solid white
ADJUSTING HEADPHONES
1 Adjust the headphones by sliding earcups up
and down the extended part of the headband
2 It may be easier to adjust the headphones on
your head Slide the earcups up and down the
headband until they sit comfortably on your ears
®
USB-A
USB-C
2 sec.
LOGI Zone
Vibe 125
6 English