Areas Of Application; Preparing The Insert; Preparing The Load; Pre-Cleaning The Carrier Frame - Miele APFD 203 Operating Instructions Manual

en - Areas of application
Pre-cleaning the
carrier frame
Inserting the car-
rier frame
26

Preparing the insert

Remove the upper basket from the machine.

Pull the lower basket out of the wash cabinet onto the machine

door.
Place the insert into the lower basket.

The rear panel of the insert is facing the rear panel of the wash cab-
inet.

Preparing the load

Check whether the carrier frame requires manual pre-cleaning, e.g.

to remove soot.
If required, carry this pre-cleaning out in line with the manufac-

turer's instructions.
 Carry straps that point upwards can get caught in the machine
spray arm and affect the cleaning result or can tear off the spray
arm or damage the machine when the insert is removed.
Place the carrier frame in the front part of the insert with the carry

straps pointing downwards.
Lean the carrier frame diagonally against the support grid in the rear

part of the insert.
The carry straps must hang loose to ensure the wash water cleans
and rinses them completely.
Push the lower basket with the insert into the wash cabinet.


After reprocessing

It is essential that you pay attention to the "Application technology"
chapter in the operating instructions for the dishwasher or the ma-
chine and the instructions specified by the manufacturer of the carrier
frames for compressed air units.