Clock Setting - Kenwood K20MSS15 Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will show "0:00". Please
ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock/Pre-Set (1) button and the
hour digits will flash.
2. Turn the Time/Weight/Auto Menu (3) dial
to adjust the hour digits. The input time has
to be within 0-23 hours.
3. Press the Clock/Pre-Set (1) button and the
minute digits will flash.
4. Turn the Time/Weight/Auto Menu (3) dial
to adjust the minute digits, the input time
has to be within 0-59 minutes.
5. Press the Clock/Pre-Set (1) button again
to complete the clock setting.
":" will start flashing and the time will
illuminate.
• In the process of clock setting, if the
Stop/Clear (2) button is pressed or if
there is no operation within 1 minute, the
microwave will go back to the previous
status automatically.
• If the clock needs to be reset, please
repeat steps 1 to 5.
• To find out the current time while the
microwave is operating, press the
Clock/Pre-Set (1) button. It will last
for 2-3 seconds and then return to its
original display.
18
A-1 A-2 A-3 A-4
auto reheat vegetables fish meat
A-5 A-6 A-7 A-8
pasta potatoes pizza soup
1
2
3