Hose And Cable Lengths; Water Inlet - Siemens iQ300 WD14S4 Series Manual

Hose and cable lengths

Connection on left side
( ~ 140 cm
0 ~ 140 cm
8 ~ 60 cm
@ 0 cm ~ 100 cm
or
Connection on right side
( ~ 94 cm
0 ~ 195 cm
8 ~ 100 cm
@ 0 cm ~ 100 cm
If the supply hose is too short for
Note:
your connection, you can order an
extension from the after-sales service.
Positioning and connecting
Slide in installation
For a slide in or build under Installation
the appliance cover plate can be
removed.
The appliance must be built under or
built in prior to connecting to the power
supply.
The appliance can be built into or under
a kitchen work surface. For this
purpose, a recess width of 60 cm is
required.
Note:
The washing machine must only be
■
installed under a one-piece worktop
that is permanently attached to the
surrounding cabinets.
For safety reasons in build-under
■
installation, a metal cover must be
assembled by a specialist in place of
the appliance cover plate.
The metal cover can be obtained
■
from the Customer Service (order
no. 20002788).

Water inlet

:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve* in water (it contains an electric
valve).
* Depending on the model
Observe the following when connecting
the appliance:
Notes
Only operate the appliance using
■
cold mains water.
Do not connect the appliance to the
■
mixer tap of an unpressurised hot-
water boiler.
en
17