Table of Contents
Advertisement
3. Phone User Interface
3.1 Hardware Component Instructions
The main hardware components of the 100IP-2P&100IP-2 IP Phone are the LCD screen and
the keypad.
Hardware component instructions of the 100IP-2P&100IP-2 IP Phone are:
ITEM
1
LCD Screen
2
Line Key
Motorola
Displayed information about calls, messages, soft keys, time, date and
other relevant data:
• Call information — caller ID, call duration
• Icons (e.g.
)
• Missed calls or second incoming caller's information
•Time and date
Red, flashing: Incoming call, Hold
Red, steady: Pick up but not on communication, on communication
Light off: Idle
L1 orange steady: Under the idle status, the light will on when: There
has Missed Call, Forwarded Calls feature enable, Account enable DND
feature, SMS, Voice Message, Ring volume is 0, SIP account register fail,
Network fail.
NOTE: L1 has green and red LED, L2 only have red LED, L1's green LED
status only work with red LED, then they show Orange.
DESCRIPTION
Advertisement
Table of Contents
