Philips 8000 Series User Manual page 25

EN
Problem Possible cause
The appliance The steamer has
produces no not heated up
steam. sufficiently )power
button flashes(.
Auto shut-off has
been activated when
the appliance has not
been used for more
than 10 minutes
)power button
flashes(.
Steam trigger has
not been pressed to
emit steam.
Low water level in
the tank or the tank
is not inserted
properly.
Steam lock has
been activated for
10 minutes.
Water leaks out The water tank is
not inserted
from the
steamer base. properly.
Water tank has
been overfilled.
Steam lock Fail to enter steam
cannot be lock function.
activated.
Solution
Let the appliance heat up for 90
seconds. When the appliance is
ready for use, the light turns steady.
Press the power button and wait
for 90 seconds for the appliance to
heat up again.
Press the steam trigger to activate
steam.
Refill the water tank and insert it
properly.
Steam lock feature comes with
automatic release function. Double
tap on the steam trigger again for
continuous steam ) refer to
Insert the tank properly.
Fill water up to its MAX marking.
Double tap to activate the steam
lock function ) refer to
(.
(.
25