Huawei SUN2000-4.95KTL-JPL0 Quick Manual page 6

1.3 Completing Electrical Connections of SUN2000-4.95KTL-NHL2
1. Install the PE cable for SUN2000-4.95KTL-NHL2.
Before connecting cables, ensure that the DC switch on the SUN2000 and all the switches
connected to the SUN2000 are set to OFF. Otherwise, the high voltage of the SUN2000 may
result in electric shocks.
• It is recommended that silica gel or paint be used around the ground terminal after the PE
cable is connected.
• It is recommended that you connect the PE cable to the right ground point and reserve the
other ground point.
Antenna port (ANT)
2. Install the WLAN antenna.
3. Install the AC output power cable for SUN2000-4.95KTL-NHL2.
AC output port (AC)
Ground
point
Ensure that the
WLAN antenna is
installed securely.
5