Table of Contents
Advertisement
10. Installation
Wind/snow prevention duct
Installing the outdoor unit in windy region
f In windy regions such as near sea shores, protection wall or wind protection duct must be installed for normal opera-
tion of the outdoor unit. (Refer to the illustration of the snow prevention duct, for installing the wind protection duct.)
f Install the wind prevention duct with the consideration of major wind direction. If the direction of the discharge
part is same as major direction of the wind, it could cause product's performance decrease.
Cautions regarding on installing the frame and selecting the base ground
• The base ground must be solid and the outdoor unit must be fixed with anchor bolts.
CAUTION
• Make sure to install outdoor unit in a place strong enough to withstand its weight. If the place cannot
withstand the weight of the outdoor unit, outdoor unit may fall and cause personal injury.
• When installing on a rooftop subject to strong wind, countermeasures must be taken to prevent the unit from falling down.
• Use a frame that is resistant to corrosion.
782 (30.79)
2000 (78.74)
1197 (47.13)
2415 (95.08)
1192 (46.93)
2415 (95.08)
560 (22.05)
560 (22.05)
<AM140/160/180/200/220 XV
560 (22.05)
406(15.98)
<AM240/260/280/300 XV
880 (34.65)
560 (22.05)
XV
<AM080/100/120
>
1295 (50.98)
560 (22.05)
1295 (50.98)
560 (22.05)
871 (34.29)
550 (21.65)
765 (30.12)
871 (34.29)
550 (21.65)
765 (30.12)
>
871 (34.29)
550(21.65)
765(30.12)
550(21.65)
>
(Unit : mm)
139
Hide quick links:
Advertisement
Table of Contents
