Huawei AC6605 Manual page 39

AC6605 Access Controller
Dual-Link Backup White Paper

Configuration on the aggregation switch is as follows:


Figure 1-15 Dual-link backup in Layer 3 branched networking (tunnel forwarding)
Access switch
# Wireless-side configuration file of AC1
#
sysname AC1
#
vlan batch 3010 3931
#
Issue 01 (2012-05-30)
Configure the Option 43 field with the IP addresses of the active and standby ACs, and
configure the Option 60 field to identify Huawei APs. Option 43 and Option 60 are
optional in Layer 2 networking.
Configure VLAN 3010 and VLAN 3931, and assign IP address 30.30.30.5 to VLANIF
3010. VLAN 3010 is the management VLAN of APs, and VLAN 3931 is the service
VLAN of APs.
Set the default VLAN of GigabitEthernet 0/0/1, GigabitEthernet 0/0/2, GigabitEthernet
0/0/3, GigabitEthernet 0/0/4, and GigabitEthernet 0/0/5 to VLAN 3010. Configure
interfaces GigabitEthernet 0/0/1 through GigabitEthernet 0/0/4 to allow VLAN 3010,
and configure GigabitEthernet 0/0/5 to allow VLAN 3010 and VLAN 3931.
VLAN 3931
Aggregation switch
IP: 30.30.30.5
GE0/0/4
GE0/0/3
VLAN 3010
AP
IP: 19.19.19.X
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
BRAS
VLAN 3010: management VLAN
VLAN 3931: service VLAN
GE0/0/5
GE0/0/1
GE0/0/1
GE0/0/2
GE0/0/2
Access switch
AP
IP: 19.19.19.X
1 Dual-Link Backup
AC1
IP: 19.19.19.1/24
AC2
IP: 19.19.19.2/24
34