1. Manuals
  2. Brands
  3. NEC Manuals
  4. Monitor
  5. E758
  6. User manual

NEC E758 User Manual

Large format display
Hide thumbs Also See for E758:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Large Format Display
MODEL:
E758
E868
Please find your model name on the label on the rear side of the monitor.

Advertisement

Table of Contents
loading

Related Manuals for NEC E758

Summary of Contents for NEC E758

  • Page 1 User’s Manual Large Format Display MODEL: E758 E868 Please find your model name on the label on the rear side of the monitor.

  • Page 2: Table Of Contents

    Table of Contents Important Information �����������������������������������������������������������2 Recommended Use & Maintenance ������������������������������������9 Installation Chapter 1 Setup Overview ������������������������������������������������������������������11 Orientation ��������������������������������������������������������������������������17 Mounting (for Customer) ����������������������������������������������������14 Ventilation Requirements ����������������������������������������������������19 Prevent Tipping ������������������������������������������������������������������14 Mounting on Ceilings ����������������������������������������������������������19 Changing the Logo Ornament Position ������������������������������14 Attaching Mounting Accessories ���������������������������������������20 Mounting (for Trained Installers) ����������������������������������������15 Installing and Removing the Optional Table Top Stand �����21 Mounting Location ��������������������������������������������������������������16...
  • Page 3 Setup ����������������������������������������������������������������������������������73 Schedule ����������������������������������������������������������������������������77 Manufacturer’s Recycling and Energy Information Appendix D Disposing of your old NEC product �����������������������������������79 About Conversion Cables Used with the AV Terminal �������81 Energy Saving ��������������������������������������������������������������������79 NOTEE: (1) The contents of this manual may not be reprinted in part or whole without permission.
  • Page 4 FCC Information WARNINGE: The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by Sharp NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.

  • Page 5: Important Information �����������������������������������������������������������2 Recommended Use & Maintenance

    Important Information Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property.
  • Page 6 WARNING Handle the power cord with care. Damaging the cord could lead to fire or electric shock. • Do not place heavy objects on the cord. PROHIBITED • Do not place the cord under the product. • Do not cover the cord with a rug, etc. REQUIRED •...
  • Page 7 WARNING Prevent tipping and falling for earthquakes or other shocks. Cord or chain Clamp PROHIBITED To prevent personal injury or damage to the product caused by tipping over Screw (M4) due to earthquakes or other shocks, REQUIRED make sure to install the product in a stable location and take measures to prevent falling.
  • Page 8 WARNING • NEVER place the product on cloth or other materials that may be located between the product and supporting furniture. PROHIBITED • NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed. If the existing product is going to be retained and relocated, the same considerations as REQUIRED above should be applied.
  • Page 9 CAUTION Handling the power cord. Handle the power cord with care. Damaging the cord could lead to fire or electric shock. REQUIRED • When connecting the power cord to the product’s AC IN terminal, make sure the connector is fully and firmly inserted. DO NOT TOUCH •...
  • Page 10 CAUTION Incorrect usage of batteries can result in leaks or bursting. • Insert batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of REQUIRED the battery compartment. • Do not mix battery brands. •...
  • Page 11 CAUTION Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
  • Page 12 Recommended Use & Maintenance Recommended Use Ergonomics To realize the maximum ergonomic benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image persistence (after image effects). •...

  • Page 13: Installation

    Installation Chapter 1 This Chapter IncludesE: "Setup Overview" on page 11 > "Mounting (for Customer)" on page 14 > "Prevent Tipping" on page 14 > "Changing the Logo Ornament Position" on page 14 > "Mounting (for Trained Installers)" on page 15 >...

  • Page 14: Setup Overview ������������������������������������������������������������������11 Orientation

    Setup Overview 1. Determine the installation location WARNINGE: Please refer to “WARNING 7”, “WARNING 8”, “WARNING 9”, and “WARNING 12”. NOTEE: To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor’s screen area, on the table before laying the monitor face down when installing the monitor stand or mounting accessories.
  • Page 15 4. Connect the supplied power cord Screw Clamp 5. Cable information CAUTIONE: Use the provided specified cables with this product so as not to interfere with radio and television reception. For mini D-Sub 15-pin and USB, use shielded signal cables with ferrite core. For the HDMI and AV cables, use shielded signal cables.
  • Page 16 10. Recommended adjustments The backlight used for this monitor has a limited life and its brightness decreases with the usage time. Also, if the same still image is shown for a long time, “Image Persistence” may occur. “Image Persistence” is a phenomenon in which the image of an LCD remains visible after the image has changed.

  • Page 17: Mounting (For Customer) ����������������������������������������������������14 Ventilation Requirements

    Mounting (for Customer) WARNINGE: Please refer to “WARNING 7”, “WARNING 8”, “WARNING 9”, and “WARNING 12”. Contact your supplier as they may be able to provide a list of qualified installation professionals. Mounting the product on a wall or ceiling and hiring a technician are the customer’s responsibility. Maintenance •...

  • Page 18: Mounting (For Trained Installers)

    Carefully inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight of the monitor. The weight of this monitor is provided in the specifications (see "E758" on page "E868" on page 66).

  • Page 19: Mounting Location

    Installing a safety wire When installing the monitor to a wall or a ceiling, use commercially-available wall or ceiling mounting brackets, but also a safety wire. WARNINGE: Please refer to “WARNING 9”. CAUTIONE: Please refer to “CAUTION 7”. NOTEE: When installing, do not apply pressure to the LCD panel or excessive force to any part of the monitor by pushing or leaning on it.
  • Page 20 Orientation • When using the monitor in the portrait position, it should be rotated counterclockwise so that the right side is moved to the top and the left side is moved to the bottom. Improper ventilation may shorten the lifetime of the monitor. Power Indicator NOTEE: The OSD menu is always shown in the landscape orientation.
  • Page 21 The monitor cannot be used when inclined 15° or more. WARNINGE:: Installing the monitor at an angle of 15° or more may cause a malfunction. Within 15° Within 15° Within 15° Within 15° English - 18...
  • Page 22 Ventilation Requirements When mounting the monitor in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure to allow heat to disperse, as shown below. ≥ 100 mm ≥ 30 mm ≥ 100 mm < 40°C NOTEE: The maximum environmental operating temperature of the monitor is 40°C.

  • Page 23: Attaching Mounting Accessories

    Attaching Mounting Accessories Be careful to avoid tipping the monitor when attaching accessories. 1. Attach eyebolts for mounting This model is equipped with pre-installed eyebolt brackets for attaching eyebolts (not included) to aid in mounting. • Screw the eyebolts into eyebolt holes in eyebolt brackets as shown in the picture. •...

  • Page 24: Installing And Removing The Optional Table Top Stand

    Installing and Removing the Optional Table Top Stand WARNINGE: Please refer to “WARNING 8”. CAUTIONE: Please refer to “CAUTION 5”. For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by the manufacturer. NOTEE:: •...

  • Page 25: Parts Names And Functions

    Parts Names and Functions Chapter 2 This Chapter IncludesE: "Control Panel" on page 23 > "Terminal Panel" on page 24 > "Wireless Remote Control" on page 26 > English - 22...

  • Page 26: Control Panel ����������������������������������������������������������������������23 Wireless Remote Control

    Control Panel Central Left Right Down INPUT Button Button (power button) INPUT: Cycles through the available inputs when the OSD Switches between power on and standby. See page menu is closed. MENU/EXIT Button [HDMI1], [HDMI2], [HDMI3], [VGA(RGB)]/[VGA(YPbPr)], Opens the OSD menu when the OSD menu is closed. [AV], [Media Player].

  • Page 27: Terminal Panel

    Terminal Panel MAIN AC IN POWER POWER RS-232C HEADPHONE SPDIF OUT AV IN SUPPLY AC IN Connector Digital audio output terminal Connects with the supplied power cord. For connection to an audio device equipped with a digital audio input terminal. Main Power Switch AV input terminal On/Off switch to turn main power ON/OFF.
  • Page 28 Audio input terminal (stereo mini jack) For connection to the audio output terminal of a computer or another device. USB Type-A port Can be used to display photos (still images) and play video and music files stored in a USB storage device. Check the shape of the connectors when connecting a USB storage device or USB cable.
  • Page 29 Wireless Remote Control PICTURE Button Selects the picture mode. Available picture modes are [Dynamic], [Standard], [Energy Savings], [Conferencing], [HighBright], [Custom], and [HDR Video]. p, q, t, u, OK (cursor buttons) Used to navigate inside and select the menus. VOL- Button (volume minus button) VOL+ Button (volume plus button) Increases or decreases the audio output level.

  • Page 30: Connections

    Connections Chapter 3 This Chapter IncludesE: "Wiring Diagram" on page 28 > "Headphones Connection" on page 28 > "Connecting to a Personal Computer" on page 29 > "Connecting to a Media Device with HDMI" on page 30 > "HDMI-CEC Command" on page 31 >...

  • Page 31: Wiring Diagram �������������������������������������������������������������������28 Hdmi-Cec Command

    Wiring Diagram USB storage device Computer (stereo mini jack) Computer (D-sub) Video player (stereo mini-jack) Video player (component) Computer (HDMI) POWER RS-232C SUPPLY HEADPHONE SPDIF OUT AV IN Video player (HDMI) Video player Computer (RS-232C) (composite) Power supply to external equipment: AV amplifier 5 V/3 A (max) Blu-ray or DVD player (HDMI)

  • Page 32: Connecting To A Personal Computer

    Connecting to a Personal Computer Connecting to a Computer with HDMI The monitor can be connected to and used with video players and computers equipped with an HDMI output. For more information, refer to the user’s manual of the player or the other devices. •...

  • Page 33: Connecting To A Media Device With Hdmi

    Connecting to a Media Device with HDMI The monitor can be connected using a single HDMI cable to Blu-ray players, streaming media players, or game consoles for the highest picture and audio quality. 4K UHD content is shown when the connected media player also supports 4K content. Supports HDCP (High-bandwidth Digital Contents Protection) coding, a type of digital rights management that prevents high- definition content, in Blu-ray discs, DVDs and streaming media, from being copied or broadcast illegally.
  • Page 34 HDMI-CEC Command Connect an HDMI-CEC compatible device to the HDMI terminal. OSD menu HDMI-CEC Explanation Setting command name One Touch Play When an HDMI-CEC compatible device HDMI1 (Consumer is turned on, the monitor connected Setup Electronics to the device with an HDMI cable also Auto Turn Off Control) automatically turns on.

  • Page 35: Internal Video Sources

    Internal Video Sources Media Player The internal Media Player will play audio and video files that are stored on a USB storage device. See page page 41 instructions on using the Media Player. Compatible USB Storage Devices If the USB storage device connected to the monitor is not recognized, check its format. The USB storage device used with the Media Player should be in the FAT32 or FAT16 format.

  • Page 36: Basic Operation

    Basic Operation Chapter 4 This Chapter IncludesE: "Power On and Off Modes" on page 34 > "Operating Range for the Remote Control" on page 36 > "Showing the Information OSD" on page 37 > "Switching Between Sound Modes" on page 37 >...

  • Page 37: Power On And Off Modes ���������������������������������������������������34 Operating Range For The Remote Control

    Power On and Off Modes Power indicator status The monitor operates as follows in On mode when no signal is input from an external device. Mode Normal operation Auto power save mode Auto standby mode (On mode) (energy-saving mode) (energy-saving mode) Power indicator Lit blue Blinking red...

  • Page 38: [Quick Start] Are Set To [Off]

    When [LAN] is selected for control, [Power supply] and [Quick Start] are set to [Off] Home mode • When no signal is input, “No signal” is displayed and the monitor enters the auto power save mode after a while. • During auto power save mode, the monitor enters the auto standby mode if no LAN signal is received for 3 minutes. If a LAN signal is input during auto standby mode, the auto power save mode is not resumed.
  • Page 39 Operating Range for the Remote Control Point the top of the remote control toward the monitor’s remote control sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from the remote control sensor, or within a horizontal and vertical angle of 30°...

  • Page 40: When [Rs-232C] Is Selected For Control, [Power Supply] And Switching Between Picture Modes

    Showing the Information OSD The Information OSD provides information such as the selected video input terminal, resolution, and IP address. Press the INFO button of the remote control to bring up the information OSD. HDMI1 Input name 1080p@60Hz Resolution IP ADDRESS : 192.xxx.x.xx SDR / HDR information IP address* * When [Information OSD] is set to [On]:...

  • Page 41: Setting The Aspect Ratio

    Setting the Aspect Ratio Press the ASPECT button of the remote control to change the Aspect Ratio setting between Normal, 1:1, Full, and Zoom. NOTEE: This setting cannot be changed when [Media Player] is selected for the input signal. Normal 1E:1 Full Zoom...

  • Page 42: When [Lan] Is Selected For Control, [Power Supply] And Osd (On-Screen Display) Controls

    OSD (On-Screen Display) Controls The monitor features an OSD (On-Screen Display) menu that allows the user to easily adjust the screen. By operating the menu displayed at the top of the screen, you will be able to adjust the brightness and the other screen settings. OSD menu structure The OSD menu is composed of the following elements.
  • Page 43 The function of each OSD menu element is briefly explained below. For more details on the content of the menu, see “OSD Controls List” (page 69). Video settingsE: Select one of the default picture modes, manually adjust the color settings, adjust the aspect ratio, and adjust the other settings related to the image.

  • Page 44: Using The Media Player Menu

    Using the Media Player Menu Operation buttons The Media Player plays image, video, and music files located on a USB storage device connected to the USB • Press the OK button of the remote control while playing Type-A port of the monitor (page 25).
  • Page 45 Other functions • One or more selected files. - The selected files are played on a loop, in the sorted • Select to view the playlist of files. order. You can also select the files to play from the list. •...
  • Page 46 Data Format for USB Supported file system FAT16 (max 2 GB), FAT32 (max 4 GB) Max folder level Max number of photos Photo mode File extension Data format Min resolution (H x V) of Max resolution (H x V) of image image JPEG, JPG, JPE...

  • Page 47: Advanced Operation

    Advanced Operation Chapter 5 This Chapter IncludesE: "Creating a Power Schedule" on page 45 > "Using Picture Modes" on page 46 > "Setting Security and Locking the Monitor Controls" on page 47 > "Locking the Button Controls" on page 48 >...

  • Page 48: Creating A Power Schedule

    Creating a Power Schedule The schedule function allows the monitor to automatically switch between power on and standby mode at different times. To program the scheduleE: HDMI1 1. Enter the [SCHEDULE] menu in the OSD menu. Schedule a. Use the p/q buttons of the remote control to select [Current Sleep Timer Power On Time settings].

  • Page 49: Using Picture Modes ����������������������������������������������������������46 Locking The Button Controls

    Using Picture Modes There are different picture modes available. They have been configured for different applications as described in the “Picture Mode Types” table below. To change picture modesE: In the OSD menu, go the [Video] -> [Picture Mode], or press the PICTURE button of the remote control to select a mode. HDR Video ->...

  • Page 50: Setting Security And Locking The Monitor Controls

    Setting Security and Locking the Monitor Controls Under normal operation, the monitor can be controlled by any person using the remote control or the monitor control panel. You can prevent unauthorized use and changes to the monitor settings by enabling the security and lock settings. The security and locking functions covered in this section are: •...
  • Page 51 Locking the Button Controls The lock settings prevent the monitor from responding to button presses on the remote control or monitor control panel. When locking the button controls, some buttons can be configured to remain unlocked. Locking and unlocking the button controls do not require a password.
  • Page 52 Locking the Remote Control Buttons The [IR Lock Settings] prevent the monitor from being controlled using the remote control. HDMI1 Setup Input Labels Key Lock Settings Mode 1 IR Lock Settings Mode 2 Power supply LED Indicator Mute Settings Image Rotation Thermal Management Signal Information Move...

  • Page 53: External Control

    External Control Chapter 6 This Chapter IncludesE: "Controlling the Monitor via RS-232C" on page 51 > "Controlling the Monitor via LAN" on page 52 > "HTTP Browser" on page 53 > "Commands" on page 57 > Connecting an external device There are two options to connect an external device to control the monitor.

  • Page 54: Controlling The Monitor Via Rs-232C

    Controlling the Monitor via RS-232C This monitor can be controlled by connecting a personal computer with an RS-232C terminal to the RS-232C terminal of the monitor with a commercially-available RS-232C crossover cable. The following operations are possible. • Turning the monitor on or putting it into standby. •...

  • Page 55: Controlling The Monitor Via Lan ������������������������������������������52 Commands

    Pin Assignment RS-232C input / output Pin No. Name D-sub 9-pin (monitor side) This monitor uses RXD, TXD and GND lines for RS-232C control. Controlling the Monitor via LAN The monitor is equipped with a LAN port (RJ-45). Connecting the monitor to a network allows you to receive email notifications from the monitor and control the monitor from a computer via a network.

  • Page 56: Http Browser

    HTTP Browser Overview Connect the monitor with a commercially-available LAN cable to configure the LAN settings using the HTTP server function. This monitor uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. Refer to the help files for the Web browser to change the settings to use JavaScript and Cookies.
  • Page 57 The functions related to the network can be configured the same way as in the OSD menu using the links below. INPUT SOURCE: HDMI1 STATUS OVERVIEW PROTOCOL STATUS ROOMVIEW SYSTEM CRESTRON CONTROL MODEL NAME E758 SERIAL XXXXXXXXXX NAME FIRMWARE VERSION Vx.x.x / Vx.x.x LOCAL TIME WWW MMM DD XX:XX:XX 20YY NETWORK UPTIME...
  • Page 58 Network Settings Click on “NETWORK” on the left-hand column on the HOME screen to enter the setting screen. INPUT SOURCE: HDMI1 STATUS PROTOCOL NETWORK SETTINGS ROOMVIEW INTERFACE CRESTRON CONTROL DHCP IP ADDRESS 192.168.0.10 NAME SUBNET MASK 255.255.255.0 NETWORK DEFAULT GATEWAY 0.0.0.0 SYSTEM DNS PRIMARY...
  • Page 59 CRESTRON CONTROL Settings Click on “CRESTRON CONTROL” on the left column below HOME. CRESTRON CONTROL Enables or Disables managing from the controller. CONTROLLER IP ADDRESS Sets the IP address of the CRESTRON SERVER. IP ID Sets your CRESTRON SERVER IP ID. PORT Sets the Crestron port used for Ethernet communication.
  • Page 60 Commands Connecting the monitor to a computer via RS-232C or to a network via LAN allows for the transmission of commands to the monitor, providing remote control of the monitor from a connected device. Instructions for each command format can be found in “External_Control.pdf”...

  • Page 61: Troubleshooting

    Troubleshooting Chapter 7 This Chapter IncludesE: "When a problem occurs with the monitor���" on page 59 > "Nothing is displayed���" on page 59 > "The image is not displayed correctly���" on page 60 > "An instruction or caution screen is displayed���" on page 61 >...

  • Page 62: When A Problem Occurs With The Monitor

    When a problem occurs with the monitor... In such a case, refer to the following. Nothing is displayed... Symptom Condition Cause and solution Reference Nothing is displayed The power indicator is off Check that the power cord is properly connected. P.12 on the screen.

  • Page 63: The Image Is Not Displayed Correctly

    The image is not displayed correctly... Symptom Cause and solution Reference Black dots (dots not lit) or bright This is due to the characteristics of LCD panels and is not a malfunction. dots (dots always lit) appear on the screen. The brightness of the image is This may happen depending on the content displayed.

  • Page 64: Others (Remote Control, Speakers)

    An instruction or caution screen is displayed... Symptom Cause Solution Reference A caution message is The signal cable may not be connected Check that the signal cable is securely P.28 displayed on the screen.* properly to the input or output terminals connected between the input terminal of the monitor or the computer.

  • Page 65: When Using A Media Player

    Others (when connected via RS-232C or LAN) Symptom Cause and solution Reference Control via RS-232C is Check that the RS-232C crossover cable is correctly connected. P.51 not available. Control via LAN is not Check that the LAN cable (Cat.5 or higher) is correctly connected. P.52 available.

  • Page 66: Specifications

    Specifications Chapter 8 This Chapter IncludesE: "Compatible Signal List" on page 64 > "E758" on page 65 > "E868" on page 66 > English - 63...

  • Page 67: Compatible Signal List �������������������������������������������������������64 E868

    Compatible Signal List Scanning frequency HDMI Signal name Resolution Remarks (RGB) (YPbPr) Horizontal Vertical MODE0 MODE1 MODE2 640 x 480 31.5 kHz 60 Hz SVGA 800 x 600 37.9 kHz 60 Hz 1024 x 768 48.4 kHz 60 Hz 1280 x 720 45.0 kHz 60 Hz WXGA...

  • Page 68: E758

    E758 Size (display size) 75" / 189.27 cm diagonal Type of LCD Active Matrix Color TFT LCD Viewable Size 1649.66 x 927.94 mm Resolution 3840 x 2160 Pixel Pitch 0.430 mm Color Over 1073 million colors Brightness 350 cd/m Contrast Ratio...
  • Page 69 E868 Size (display size) 86" / 217.43 cm diagonal Type of LCD Active Matrix Color TFT LCD Viewable Size 1895.04 x 1065.96 mm Resolution 3840 x 2160 Pixel Pitch 0.494 mm Color Over 1073 million colors Brightness 350 cd/m Contrast Ratio 1200:1 Viewing Angle 89°...

  • Page 70: Trademark And Software License

    Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. NaViSet is a trademark or registered trademark of Sharp NEC Display Solutions, Ltd. in Japan and other countries. CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries.

  • Page 71: External Resources

    This free software is an advanced and powerful network-based control, monitoring and asset management system for NEC monitors and projectors. The software is available for Microsoft Windows and macOS. The latest version of the NaViSet Administrator software is available on our website.

  • Page 72: Osd Controls List

    OSD Controls List Appendix C This Chapter IncludesE: "Video Settings" on page 70 > "Audio Settings" on page 72 > "Setup" on page 73 > "Control Settings" on page 75 > "Media Player" on page 76 > "Schedule" on page 77 >...

  • Page 73: Video Settings ��������������������������������������������������������������������70 Control Settings

    Video Settings Video Picture Mode Provides pre-configured video settings suitable for various environments where this device may be used, or customize settings to your preference. HDR Video Video setting for the HDR format. (Can be selected only when an HDR signal is input.) Dynamic High-contrast video setting.
  • Page 74 Video Color Temperature Adjusts the color temperature of the entire screen. A low color temperature will result in a reddish screen. A high color temperature will make the screen bluish. If a temperature needs further adjustment, the individual R/G/B/ levels of the white point can be adjusted.

  • Page 75: Audio Settings ��������������������������������������������������������������������72 Media Player

    Audio Settings Audio Sound Mode Set pre-configured audio settings suitable for various environments where the monitor may be used, or customize settings to your preference. Standard Standard sound setting. Music Optimized settings for music playback or audio in conference rooms. Movie Surround sound for clarity in retail stores and other signage applications.

  • Page 76: Setup ����������������������������������������������������������������������������������73 Schedule

    Setup Setup OSD Settings Language Select the language used in the OSD. Transparency Set the transparency level of the OSD menu between 30%, 50%, 70% and Off. The higher the percentage, the more transparent the OSD menu is. Information OSD Displays or hides the Information OSD.
  • Page 77 Setup VGA Options This option is only enabled when a VGA signal is input. VGA Mode Select [RGB] or [YPbPr] depending on the signal received into the VGA input terminal. Auto Adjust Automatically adjusts settings such as the image position. H.Position Adjusts the horizontal position of the screen.
  • Page 78 Control Settings Control Settings Control Interface NOTEE: Only one method, LAN or RS-232, can be used at a time. Sets network (LAN) control. RS-232C Sets RS-232C control. Network Settings Configures the network settings of the monitor. DHCP OnE: Obtains the network settings from the DHCP server on the network. OffE: Sets fixed networks settings.
  • Page 79 Media Player Media Player USB Demo Mode Photos (still pictures), music and video files saved in the “NDS_DEMO” folder in the USB storage device can be played automatically. You can select the types of files to play in the USB Demo Mode. NOTEE: Enabling USB Demo Mode To enable the USB Demo Mode, [Energy Mode] in the [Setup] menu must be set to [Retail].
  • Page 80 Schedule Schedule Sleep Timer Sets the time until the monitor turns off automatically. Off, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes, 240 minutes can be selected. Current Time settings Sets the current time. NOTEE: If the monitor remains for two weeks or more with the power cord unplugged, the clock will not show the correct time.

  • Page 81: Manufacturer's Recycling And Energy Information

    Manufacturer’s Recycling and Appendix D Energy Information This Chapter IncludesE: "Disposing of your old NEC product" on page 79 > "Energy Saving" on page 79 > "About Conversion Cables Used with the AV Terminal" on page 81 > We are strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment.

  • Page 82: Disposing Of Your Old Nec Product

    Disposing of your old NEC product The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, we offer a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
  • Page 83 WEEE Mark (European Directive 2012/19/EU and amendments) Disposing of your used productE: In the European Union EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords.

  • Page 84: About Conversion Cables Used With The Av Terminal

    About Conversion Cables Used with the AV Terminal Use a commercially-available video cable with a 4-contact mini jack (φ3.5 mm) at one extremity for conversion cables to connect to the AV terminal. Check the wiring specification of the cable in advance and choose a proper cable. NOTEE: *Different wiring specifications may exist for 4-contact mini jack cables.
  • Page 85 Rev.1 English - 82...

This manual is also suitable for:

E868

Table of Contents