Siemens SiPass integrated Reference Manual page 31

A6V11144326
Source State (trigger)
Workgroup Capacity
Not Full
Anti-Passback Same as Access
Area Point Points
Group
Apogee Control Trig. ID
Bus Driver Bus Driver Alive
Bus Driver Down
Camera Point Acknowledged
Motion Alarm
Motion Normal
Video Loss
Video Normal
Camera Point Alarm
Group
Normal
Database Database
Synchronization
failed
Database
Synchronization OK
Door Interlocking Interlocking Alarm
Interlocking Disabled Door Interlocking is disabled.
Interlocking
Operational
External Point Acknowledged
Alarm
Normal
Floor Point Alarm
Host event tasks
Description
The number of cardholders in the area from a
Workgroup has not reached the maximum for
that Workgroup.
See Above
A host event task is triggered when a message is
received from the Apogee Control corresponding
to the Apogee Trigger ID.
A host event task is triggered when the bus
driver operating the CCTV interface is restored.
Driver A host event task is trig-gered when the
bus driver operating the CCTV interface goes
down
The link between the camera switcher and the
monitor is working.
A motion alarm has been gener-ated by the
camera.
A motion normal has been generated by the
camera.
A host event task is triggered when the live video
feed from a camera has been lost.
Video feed from the camera is restored.
A host event task is triggered when a camera
point group enters the alarm state.
A host event task is triggered when a camera
point group returns to the normal state.
A host based event task is triggered when the
database synchronization process has failed.
A host based event task is triggered when the
database synchronization process has
succeeded.
Door Interlocking alarm state.
Door Interlocking is enabled.
An event is triggered when an external point is
acknowledged at the originating server.
An event is triggered when an External point
(source point or area node) enters an alarm state
and that information is sent to SiPass integrated
by the exter-nal application.
An event is triggered when an External point
(source point or area node) enters a normal state
and that information is sent to SiPass integrated
by the exter-nal application.
An alarm state has been reported by the floor.
7
Sources
31 | 66