Connecting Cable To Pci Expansion Unit - Fujitsu M10 Product Notes

Connecting Cable to PCI Expansion Unit

2.
Connect the link cable.
Note - The two link cables are the same. Each cable has the same indication labels on the both
ends. When connecting cables, ensure that cable ends having the same label are connected to
the corresponding positions of the link card and link board.
Figure 8-3
Number in figure
1
Note - The two ports have the same shape and thus you may connect them incorrectly. Check
the labels to confirm that each cable is connected to the correct port.
Hold the connector part of the link cable (electrical) or link cable (optical) and insert it
straight into the opening. Do not hold the cable part when inserting the cable.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
82
Shape and tab of link cable (optical)
(1)
Description
Tab