Configuring your drive project
12. Click on "Continue >".
The summary view opens.
13. Click "Complete".
You will now exit the wizard.
14. In order to transfer the manually changed data to the drive system, select menu
command Target system > Download > Project to target system.
The data are copied to the Control Unit.
You have now completed configuring the infeed.
4.3
Configuring the Motor Module
The Control Unit has detected the connected Motor Module and the SMI motor during the
automatic configuration process. The device data have been transferred to the Control Unit.
The Control Unit has automatically entered the correct device data into the parameters
required to operate the components.
The sample project is now ready to commission.
26
All manuals and user guides at all-guides.com
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
Getting Started