Page 1
INSTRUCTION MANUAL Die Grinder MGD100 007131 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model MGD100 Max. collet capacity 6 mm or 6.35 mm (1/4") Max. wheel point diameter 38 mm No load speed (min 25,000 Overall length 328 mm Net weight 1.1 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
Never carry the tool by the cord or yank it to This electric tool is in accordance with the relevant disconnect it from the socket. Keep the cord away safety requirements. Repairs should only be from heat, oil and sharp edges. carried out by qualified persons using original 12.
17. Do not use water or grinding lubricant. 18. Do not use this tool as cutter. Loosen the collet nut and insert the wheel point into the 19. Ensure that ventilation openings are kept clear collet nut. Use one wrench to hold the spindle and the when working in dusty conditions.
Page 5
Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. 1. Brush holder 2. Screwdriver 007135 To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by an Makita Authorized Service Center.
Page 8
Makita Corporation Anjo, Aichi, Japan 884751-1...